How to Replace a Kia Sportage Replacement Key
The key on many Kia models comes with an electronic keyless entry system built in. The key can be compared to an remote control, and can be exchanged with a new one from a Kia dealer or a locksmith.
Key fobs might stop working due to a number of reasons, such as a dead battery, worn-out buttons signal interference or water damage. Here are some tips to assist you in getting your Kia key fob that is a replacement for the sportage for good.
How do you replace a smartkey or remote key?
If your Kia is equipped with an intelligent key, remote key, push-to-start keys, or a standard non-transponder key made of metal The battery inside these keys will eventually require replacing. This is particularly true if your car displays a message indicating that the remote or smart keys are in poor condition.
This is a relatively easy process. To replace the battery on the keyfob, remove your mechanical key from the slit that is located at the back of the fob. Then, push the cover off. Inside the key fob there will be the small screw that holds the battery in its place. With a small screwdriver, unscrew the screw and remove the old battery. Install the new battery and then close the opening on the key fob.
When the key fob is equipped with new batteries and you've tested it, press the locks and unlock buttons. It's okay when the doors lock or unlock as you expect. You can now make use of your Kia's hands-free lock/unlock feature whenever your fingers feel cold or you have to make errands in Brandon.
Note: Some key fobs (transponder chip or smart keys) may require their programming done. This requires a specific programming machine that only the dealer or automotive locksmith has access to. Other keys (non-transponder metal keys) do not require programming. If you're looking to reprogramme your key, you'll need to note the key code number on the tag for the key code.
How do I replace a battery
If the Kia key fob is unable to respond to pressing the lock or unlock button, it is most likely that the battery is low. A battery that is not functioning properly could cause other problems like the check engine light coming on or delayed engine cranking. It is fairly easy to replace key fob batteries using just the use of a few tools.
Make sure you turn off your vehicle and close all doors prior to starting. Find the small, metal or plastic piece near the bottom of the key fob. Then, jiggle it until the key is released. Then, you can insert this key into the handle of the door for the driver to open your car.
To replace the battery inside the key fob, remove the cover on the rear. Utilize a plastic plier tool to loosen up the latch that holds the black negative cable. Remove the old battery and orient the new battery to ensure that the "+" positive side is facing you, and the "negative" negative side is facing towards the fob's electronic contacts. Push the new CR2032 battery straight into place and avoid excessive force to avoid bending or damaging the contacts of the metal.
Once the new battery is installed and the key fob is turned on, turn it off and back on in the ignition several times until the door locks cycle. You can then test your Kia key fob and see whether it's working again.
How to replace the smart key?
You can have a standard keyfob, or a Smart Key, based on the model of Kia Sportage. The smart key has an embedded mechanical key blade while the standard key fob does not. Both key fobs come with batteries that will eventually require replacement. This is an easy process that takes only two minutes.
Make sure to shut off your Kia and sit on a flat or well-lit surface prior to when you begin. Keep in mind that there are small parts inside the fob that can be removed if not vigilant.
The small release button is located on the lower backside. It's either a circular button or a rectangular slot. kia key case can open the key fob by pressing the button.
Once you have the key fob open then you can take out the old battery and replace it. The new battery is C2032, and can be bought through the internet or at a local auto parts store. When you are done it should be possible to lock and unlock your vehicle with your key fob even if your engine isn't running!
How to replace a mechanical key
The Kia key fob is a wonderful feature that lets us lock and unlock our vehicle with the click of the button. But, as with all devices, it can have problems from time to time. There are solutions to address these issues and keep your key fobs working for an extended period of time.
One of the most frequently encountered problems is a weak or dead battery. The fob could be able to stop working entirely or to work intermittently. If this is the problem, replace the battery with an entirely new battery.
If this doesn't resolve the issue then try using a normal flathead screwdriver to wedge open the casing of the fob's plastic. Be careful not to damage internal components, or scratch the plastic. When the battery is open, carefully take off the battery you have been using and replace it with a brand new one.
Close and open the door with the mechanical key. (Every kia fob comes with an emergency mechanical key that fits into the slot). Test the key fob to ensure it's functioning properly. If the key fob isn't working, contact a locksmith or dealer to help resolve the issue. To avoid future lockouts, make sure you get an emergency key that will work on all trunk and door cylinders.